A set of our most popular Low Liquid Gel gels in 5 ml format. An ideal convenient format for getting acquainted with the G-Gode brand, replenishing stocks or for beginner masters.

Colors included in the Low Liquid Gel set: #3,5,7,8,10

Low Liquid Gel is a modified liquid gel created on the basis of two functional acrylates: polyacrylate and urethane acrylate.

It is this combination that provides:

• plasticity in a thin layer

• hardness in a thick layer

• resistance to external influences

For full polymerization in a layer of up to 1 mm, two types of initiators are used, which guarantee reliable adhesion and stable wearing of the material.

The biocompatible formula and correctly selected consistency do not penetrate into the deep layers of the nail, helping to preserve the health of the natural plate.

Low Liquid Gel by G-Code was developed based on feedback from Ukrainian masters, complies with European protocols and is made from EU certified components.

Key benefits:

• Increased adhesion — even more stable coating even on thin, problematic nails

• Dense pigment — covers the nail plate in one thin layer

• Liquid consistency — fast self-leveling in seconds

• Minimum dust — perfect shape immediately after application

• Reduced polymerization temperature — safe and comfortable application

• Compatible with Smart Base and Ultra Base — works great in the hardening system

The low-temperature effect is achieved in a lamp up to 48W or in Low Heat Mode.

What is it suitable for:

• Strengthening thin and weakened nails

• Leveling the surface

• Building short and medium-length nails

• Works for both beginners and experienced masters

Who is it suitable for:

• Professionals - as a base for reliable long-lasting designs

• Beginners - thanks to easy application and comfortable work

• Masters looking for a comfortable gel to work with without aggressive effects on the nail

Ingredients (INCI):

POLYURETHANE, Di-HEMA Trimethylhexyl Dicarbamate, Isobornyl Methacrylate, Trimethylbenzoyl Phosphine Oxide, Hydroxycyclohexyl Phenyl Ketone

How to use Low Liquid Gel:

1. Nail preparation: Remove the old coating, perform a manicure, give shape. Remove the gloss with a 180/240 file, clean the surface. Apply a dehydrator then - Ultrabond (without polymerization).

2. Applying the base: Apply a thin layer of the base (Smart Base or Ultra Base) from G-Code with a rubbing motion. Cure:• LED — 30 sec | UV — 1 min. (If necessary, remove the sticky layer to increase adhesion.)

3. Applying the Low Liquid Gel: Apply a thin layer of gel in the chosen technique. Perform strengthening or modeling. Cure:• LED — 60 sec | UV — 90 sec.

4. Finishing: If necessary, file and degrease. Apply the top (https://g-code.com.ua/ua_tops) from G-Code, cure.• LED — 60 sec | UV — 90 sec.

5. Post-cure care: Apply an elixir or serum to strengthen the nails. Finish the procedure with a moisturizing hand cream.

Tip:

File the free edge of the natural nail from the bottom by 1 mm - this prevents peeling. For a low-temperature effect, use a 48W lamp or Low Heat Mode.